How to resolve AdBlock issue? × If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.
Lay Loss Calculation
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
12 years 2 months ago #1720 by Archived Forum Admin
Lay Loss Calculation was created by Archived Forum Admin
Sir,
Anybody can tell me how to calculate the lay loss in flexible conductor (Class-5).
Regards
Prasad
Anybody can tell me how to calculate the lay loss in flexible conductor (Class-5).
Regards
Prasad
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 2 months ago #1721 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Lay Loss Calculation
Hello klnp_mysore,
I am sure you know that each individual wire in the strand carries a portion of the power and that there is no jumping of electricity from wire to wire. Thus the electricity follows the helix of each wire in the strand.
The best way to determine the the resistance of your strand is:
- First, precisely manufacture the strand according to the specification.
- Second, determine the temperature corrected resistance of the strand according to your specification. The best way to determine the strand resistance is to use a properly calibrated, off-line resistance bridge from a good instrument company such as ASEA Cortaillod ( www.aesa-cortaillod.com/energy/ ).
- Third, develop a long term SPC program for drawing and stranding so that your company can properly control strand manufacture now and in the future.
Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
519 641- 3212
I am sure you know that each individual wire in the strand carries a portion of the power and that there is no jumping of electricity from wire to wire. Thus the electricity follows the helix of each wire in the strand.
The best way to determine the the resistance of your strand is:
- First, precisely manufacture the strand according to the specification.
- Second, determine the temperature corrected resistance of the strand according to your specification. The best way to determine the strand resistance is to use a properly calibrated, off-line resistance bridge from a good instrument company such as ASEA Cortaillod ( www.aesa-cortaillod.com/energy/ ).
- Third, develop a long term SPC program for drawing and stranding so that your company can properly control strand manufacture now and in the future.
Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
519 641- 3212
The following user(s) said Thank You: Mr Prasd KLN
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.073 seconds