How to resolve AdBlock issue? × If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.
10MBPS CABLE
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
12 years 10 months ago #442 by Archived Forum Admin
10MBPS CABLE was created by Archived Forum Admin
A customer requires a cable with following specification: 2.5 Sq.mm Copper Conductor, EPR Insulation 0.8mm thick, conductor wrapped with melinex tape, Pairing of wrapped conductor, 4 pair cable.
They require the cable suitable for working upto 10mbps. How can we confirm the working of cable upto 10 mbps. What are the considerations and criteria for determining the same for a cable.
They require the cable suitable for working upto 10mbps. How can we confirm the working of cable upto 10 mbps. What are the considerations and criteria for determining the same for a cable.
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 10 months ago #443 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: 10MBPS CABLE
One supplier of the test equipment would be the Anritsu Corporation. This type of equipment can be quite expensive.
www.anritsu.com/
Sincerely,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
www.anritsu.com/
Sincerely,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 10 months ago #444 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: 10MBPS CABLE
Thanks for replying. I think you did not get my question. I do not need a test equipment but I want to know how I can confirm that the cable with given design shall be suitable for a 10mbps speed.
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 10 months ago #445 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: 10MBPS CABLE
Hello again and quite frankly,
Since you don't require the test equipment, build a full length cable as an experiment.
If it passes, sell it to your customer and if it fails, redesign and try again!
That is what qualified product engineering departments and experimental budgets are for.
Sincerely,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Since you don't require the test equipment, build a full length cable as an experiment.
If it passes, sell it to your customer and if it fails, redesign and try again!
That is what qualified product engineering departments and experimental budgets are for.
Sincerely,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.071 seconds