How to resolve AdBlock issue? × If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.
Problem on Self Centering
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
12 years 10 months ago #630 by Archived Forum Admin
Problem on Self Centering was created by Archived Forum Admin
We have one Rosendahl make Extruder of size 30 mm.
The Extruder is supplied with two self Centering cross heads i.e. SF3 & SF10, which are supplied by M/S. SWISSCAB. We are extruding ETFE (Tefzel HT
2185) manufactured by M/S. Du Pont and ECTFE (Halar 500 LC) manufactured by M/S. Solvay but we are unable to get proper centre of the core.though we are
using self centred cross heads. Due to which we are not able to maintain proper thickness of insulation.
I request your advise to solve above problem
R.G.Sahasrabudhe
AGM - Development
The Extruder is supplied with two self Centering cross heads i.e. SF3 & SF10, which are supplied by M/S. SWISSCAB. We are extruding ETFE (Tefzel HT
2185) manufactured by M/S. Du Pont and ECTFE (Halar 500 LC) manufactured by M/S. Solvay but we are unable to get proper centre of the core.though we are
using self centred cross heads. Due to which we are not able to maintain proper thickness of insulation.
I request your advise to solve above problem
R.G.Sahasrabudhe
AGM - Development
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 10 months ago #631 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Problem on Self Centering
Hi Rajeev,
As you no doubt know, Rosendahl is an excellent manufacturer of extruders and Swisscab is an excellent manufacturer of crossheads and extrusion tooling.
There are only three basic reasons why you are having eccentricity problems with your wire. One is that you have too much clearance between the core and the tip for whatever the reason. The second is that the crossheads have lost their accuracy by wear and need to be rebuilt, preferably by Swisscab. The third is that the tooling is inaccurate by wear or manufacture and needs to be replaced.
Best regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
As you no doubt know, Rosendahl is an excellent manufacturer of extruders and Swisscab is an excellent manufacturer of crossheads and extrusion tooling.
There are only three basic reasons why you are having eccentricity problems with your wire. One is that you have too much clearance between the core and the tip for whatever the reason. The second is that the crossheads have lost their accuracy by wear and need to be rebuilt, preferably by Swisscab. The third is that the tooling is inaccurate by wear or manufacture and needs to be replaced.
Best regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.061 seconds