How to resolve AdBlock issue? × Nonferrous topics such as copper and aluminum, annealing, etc. go here.
Plasma annealing...
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
12 years 10 months ago #1576 by Archived Forum Admin
Plasma annealing... was created by Archived Forum Admin
I am looking for someone who may have some firsthand experience with plasma annealing of copper wire...is it effective?
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 10 months ago #1577 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Plasma annealing...
Greetings from Toronto,
Plasma annealing is not only a highly effective but also efficient method of cleaning wires, strips and tubes.
I personally have (witnessed)copper and copper alloys with great success at the plant in Austria.
For example, running a SiBz 1.7 mm wire we were able to not only run fully annealed but also anything in between, resulted in a remaining oxide layer of only 120 Angstrom.
I need to point out that plasma annealing is not a substitute for resistance annealing. If resistance annealing is getting you basically the results you are looking for it will be a more economical process.
Feel free to contact me for more detailed information.
Best Regards,
Willy Hauer
www.HowarEquipment.com
Plasma annealing is not only a highly effective but also efficient method of cleaning wires, strips and tubes.
I personally have (witnessed)copper and copper alloys with great success at the plant in Austria.
For example, running a SiBz 1.7 mm wire we were able to not only run fully annealed but also anything in between, resulted in a remaining oxide layer of only 120 Angstrom.
I need to point out that plasma annealing is not a substitute for resistance annealing. If resistance annealing is getting you basically the results you are looking for it will be a more economical process.
Feel free to contact me for more detailed information.
Best Regards,
Willy Hauer
www.HowarEquipment.com
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.065 seconds