How to resolve AdBlock issue? × Have a question on lubricants, wire drawing, quality, testing, ISO, environmental? Post your question here to get the answer!
Lubricants
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
11 years 10 months ago #2301 by Archived Forum Admin
Lubricants was created by Archived Forum Admin
Hello,
In my lubricant, sulfur is used along with sodium stearate.
There is no problem in drawing the wires but the finish is black in color and is shiny. I want a dull or matte finish instead.
If I use sodium sulfide in the formulation, will this give me good lubrication properties? Please give me your advice on the issue.
I plan to use sodium sulfide along with graphite and omit the sodium stearate. Does sodium sulfide have lubricating properties?
Thank you.
With regards
J.S.Patel
Jgdish
In my lubricant, sulfur is used along with sodium stearate.
There is no problem in drawing the wires but the finish is black in color and is shiny. I want a dull or matte finish instead.
If I use sodium sulfide in the formulation, will this give me good lubrication properties? Please give me your advice on the issue.
I plan to use sodium sulfide along with graphite and omit the sodium stearate. Does sodium sulfide have lubricating properties?
Thank you.
With regards
J.S.Patel
Jgdish
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
11 years 10 months ago #2302 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Lubricants
There is a webinar on lubricants on the page of the Wire Association which you can look at and also to contact the author Mr. David Gzesh.
A combination of calcium and sodium normal commercial lubricant soaps can give you the finish appearance you are looking with good lubrication properties. Normally the two or three passes with calcium and the rest with sodium base soaps will give you a good finish and performance
Eduardo Anaya
Senior Consultant
INDEPA S.C.
Mexico City
Tel(011-52)555-407-7451
This email address is being protected from spambots. You need JavaScript enabled to view it.
A combination of calcium and sodium normal commercial lubricant soaps can give you the finish appearance you are looking with good lubrication properties. Normally the two or three passes with calcium and the rest with sodium base soaps will give you a good finish and performance
Eduardo Anaya
Senior Consultant
INDEPA S.C.
Mexico City
Tel(011-52)555-407-7451
This email address is being protected from spambots. You need JavaScript enabled to view it.
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.066 seconds